OPTISHIELD® Customer Help & Support

Contact OPTISHIELD® Customer Service

Most Common Questions

• What is OPTISHIELD®?
• Why Do You Need OPTISHIELD®?
• How Much OPTISHIELD® Should You Order?
• How long does OPTISHIELD® last once added to the system?
• Other Frequently Asked Questions (FAQ’s)...

OPTISHIELD® General Product Information

• OPTISHIELD® Product Overview

OPTISHIELD® Product Data Sheets
• OPTISHIELD® 'Original Formula' Data Sheet
• OPTISHIELD® 'Plus' Data Sheet
• OPTISHIELD® 'II' Data Sheet
• OPTISHIELD® 'II Plus' Data Sheet
• Chloramine-T Data Sheet

OPTISHIELD® MSDS Sheets
• OPTISHIELD® 'Original Formula' MSDS
• OPTISHIELD® 'Plus' MSDS
• OPTISHIELD® 'II' MSDS
• OPTISHIELD® 'II Plus' MSDS
• Chloramine-T MSDS

OPTISHIELD® Directions For Use
• OPTISHIELD® 'Original Formula' Directions
• OPTISHIELD® 'Plus' Directions
• OPTISHIELD® 'II' Directions
• OPTISHIELD® 'II Plus' Directions

Engineering Data
• ASTM Corrosion Test Results


Conductivity and Relative Absorption Data
• OPTISHIELD® 'Original Formula' Data
• OPTISHIELD® 'Plus' Data
• OPTISHIELD® 'II' Data
• OPTISHIELD® 'II Plus' Data

Product Testing & Equipment

Testing Equipment Products
• pH Pocket Tester Data Sheet
• Chlorine Titration Test Product Data Sheet

Testing Procedures for OPTISHIELD® Solutions
• What should you test and how often - coming soon
• Recommended Test Values - coming soon
• Recommended Test Equipment - coming soon

Certification / Compliance Information

• Rohs / WEEE Compliance Statement

Shipping Questions & Information

1. Do you Ship to my country?
2. Export Information
3. Hazard Classification(s)
4. Packaging & Climatic Concerns
5. Shipping Charges
6. When will the order ship?
7. Returns

OPTISHIELD®: Frequently Asked Questions

1. What is OPTISHIELD®?
2. Why Do You Need OPTISHIELD®?
3. How Much OPTISHIELD® Should You Order?
4. Will electrical conductivity of the re-circulating fluid have a negative impact on the proper operation of the system or process equipment?
5. Will the solution be subject to high levels of ultra violet light exposure?
6. What is the temperature range?
7. Can other additives be combined with OPTISHIELD® in the system?
8. Is there a voltage potential present across the coolant circuit?
9. Will OPTISHIELD® void the manufacturer warranty?
10. What is the shelf life of OPTISHIELD®?
11. What is the shelf life of OPTISHIELD® mixed with water?
12. How long does OPTISHIELD® last once added to the system?
13. How critical is the mixture ratio of OPTISHIELD® to water?
14. What kind of safety procedures and equipment is needed when mixing OPTISHIELD® with water?
15. What size containers are available?
16. Can we acquire premixed containers of OPTISHIELD® with water from Optitemp?
17. What is the best way to dispose of used OPTISHIELD® and water mixture after draining a chiller?
18. Is OPTISHIELD® a hazardous material?
19. Are there shipping restrictions on OPTISHIELD® ? What kind of safety procedures and equipment is needed when pouring the mixture of OPTISHIELD® with water into the chiller reservoir?
20. What kind of safety procedures and equipment is needed when pouring the mixture of OPTISHIELD® with water into the chiller reservoir?
21. Can premixed containers of OPTISHIELD with water be obtained from OPTI TEMP?

What is OPTISHIELD®?

OPTISHIELD® corrosion inhibitor is a "water based" liquid additive specially formulated to protect "closed circuit" process heating & cooling systems from galvanic corrosion…………. corrosion which results from the presence of dissimilar metals within the re-circulating system. The OPTISHIELD® products are "water based", have excellent heat transfer characteristics and are normally classified as "non-hazardous". OPTISHIELD® inhibitors are specifically formulated to control corrosion in systems circulating fluid to industrial machines such as lasers, welders, machine tools and a variety of other process equipment. Read further to learn more about the benefits of using OPTISHIELD®.

Why Do You Need OPTISHIELD®?

Closed circuit heating & cooling systems often contain various dissimilar materials such as copper, brass, aluminum, tin, ferrous metals, lead, brass, and other yellow metals. When dissimilar metals are present within a untreated system galvanic corrosion normally results due to differences in electro-chemical potential of the materials. Left untreated…….. galvanic corrosion often leads to pump/seal failures, reduction in heat transfer efficiency, reduced flow, lost revenue associated downtime, and expensive system repairs. OPTISHIELD inhibitors are very effective at controlling galvanic corrosion in re-circulating systems. Improved system life, less maintenance, fewer costly repairs, and less downtime are just a few of the benefits OPTISHIELD® provides.

How Much OPTISHIELD® Should You Order?

Of moderate toxicity, OPTISHIELD® would normally be used in concentrations of 1 part OPTISHIELD® in 10 parts system fluid. For special applications the amount is normally based on a number of factors such as your system's fluid capacity, temperature, system design, and the approximate surface area of the metals present. Our engineers can recommend an appropriate concentration of corrosion inhibitor for your system. Contact OPTI TEMP for more information!

Will electrical conductivity of the fluid have a negative impact on the proper operation of the system?

Some processes specify a high resistivity (or low conductivity) fluid. One should review manufacturer specifications with regard to electrical conductivity of their system coolant to ensure that the OPTISHIELD® and water mixture falls within conductivity specifications. OPTI TEMP provides a graph of the electrical conductivity of OPTISHIELD in microsiemens/cm vs. % concentration of OPTISHIELD® in DI water for reference.

Will the solution be damaged by high levels of ultra violet light exposure?

Certain wavelengths of light can be absorbed by OPTISHIELD®. Sufficient exposure to ultra violet light may cause OPTISHIELD® to break down. OPTISHIELD® is not recommended for example in "flash lamp" laser applications where the coolant can be exposed to high concentrations of "broad spectrum" or "ultra violet" light. A relative absorption curve is available from OPTI TEMP.

What is the temperature range of the solution?

OPTISHIELD® is intended to be used in closed loop (re-circulating) systems with atmospheric reservoirs which fall in the temperature range of 40 F to 190 F. Performance outside this range may be satisfactory but is not guaranteed. Note: OPTISHIELD® is not an anti-freeze and does not provide freeze protection. However OPTISHIELD® is compatible with un-inhibited Ethylene & Propylene glycols. When an OPTISHIELD and water solution will be subject to freezing substitution of the proper % of water in the solution with glycol will normally provide satisfactory results. Contact OPTI TEMP or the glycol manufacturer for percentage recommendations.

Can other additives be combined with OPTISHIELD® in the system?

OPTISHIELD® should not be mixed with any other additives. Loss of protection or system damage may result. OPTI TEMP can not be liable for damage resulting from the use of OPTISHIELD® which is inconsistent with OPTI TEMP recommendations. Note: OPTISHIELD® is compatible with un-inhibited ethylene & propylene glycols.

What will happen if there is a voltage potential present across the coolant circuit?

If a voltage potential exists across the coolant or if electrical grounding exists, do not use OPTISHIELD®.

Will OPTISHIELD® void the manufacturer warranty?

Many OEM’s recommend OPTISHIELD® for use with their systems. However, if there are warranty concerns, the OEM and/or OPTI TEMP should be contacted prior to using OPTISHIELD® in the system to ensure that the terms of the warranty are not violated.

What is the shelf life of OPTISHIELD®?

When stored in accordance with OPTI TEMP recommendations OPTISHIELD® can normally be stored for a period of one year or more.

What is the shelf life of OPTISHIELD® when mixed with water?

OPTISHIELD® will normally provide adequate protection for a period of one year after mixing. (Note: Assuming pre-mixed and stored as directed).

How long does OPTISHIELD® last once added to the system?

OPTISHIELD® will normally provide adequate protection for a period of one year. The length of time that OPTSHIELD protects can be influenced by many factors. Protection length may vary. It is recommended that OPTISHIELD be changed out a minimum of once annually to ensure continuous protection.

How critical is the mixture ratio of OPTISHIELD® to water?

A 10% concentration level with annual change out is normally recommended. Any mixture less than 7% will compromise protection.

What kind of safety procedures and equipment is needed when mixing OPTISHIELD® with water?

Use in well-ventilated area. Do not breathe mist or vapor. Wash hands thoroughly after handling product. Protect eyes with safety goggles or glasses with side shields. SEE MSDS for more information.

What size containers are available?

OPTISHIELD® is available in 1 pint, 1 gallon, 5 gallon, 15 gallon, 30 gallon, and 55 gallon quantities. Freight is F.O.B. Traverse City, MI for 15 gallons or less, and F.O.B. Covington, KY for orders of more than 15 gallons.

Can we acquire premixed containers of OPTISHIELD® with water from OPTI TEMP?

Premixed containers of OPTISHIELD® may be obtained by contacting the OPTI TEMP sales department.

What is the best way to dispose of used OPTISHIELD® and water mixture after draining a chiller?

It is the end users responsibility to dispose of and handle in accordance with all current local, state, and federal regulations. At this time OPTISHIELD is categorized as non hazardous with respect to Land Disposal Restrictions (LDR). As long as the solution has not become contaminated by outside processes, it may be disposed of as either domestic sewage, per EPA publication 40 CFR part 261.4 or industrial wastewater discharges per section 402 of the Clean Water Act, as amended.

Is OPTISHIELD® a hazardous material?

OPTISHIELD® solution is non-flammable, non-reactive and contains no metal particles, thus it is not listed as a hazardous waste on the Environmental Protection Agency (EPA) list of hazardous materials.

Are there shipping restrictions on OPTISHIELD®?

OPTISHIELD is not a regulated chemical for shipping by the Department of Transportation (DOT).

What kind of safety procedures and equipment is needed when pouring the mixture of OPTISHIELD® with water into the chiller reservoir?

Use in well-ventilated area. Do not breathe mist or vapor. Wash hands thoroughly after handling product. Protect eyes with safety goggles or glasses with side shields

Can premixed containers of OPTISHIELD with water be obtained from OPTI TEMP?

Contact OPTI TEMP sales department for more information at 231-946-2931.

Shipping Questions & Information

Do you Ship to my country?

OPTISHIELD® can be shipped anywhere UPS freight service is provided.

Export Information:

• Schedule B Harmonization Code Description: Other Chemical Mixtures
• Schedule B Harmonization Code: 3824909160
• ECCN No: EAR99 NLR

Hazard Classification(s):

OPTISHIELD® products are NOT currently listed as "hazardous waste" on the Environmental Protection Agency’s (EPA) list of hazardous materials, per 40 CFR part 261. Nor does it fit the description of a "hazardous waste". OPTISHIELD® solution(s), as supplied by OPTI TEMP INC., are NOT deemed with respect to Land Disposal Restrictions (LDR). As long as the OPTISHIELD solution has "not" become contaminated by outside processes it should be disposed of as either Domestic Sewage, per EPA publication 40 CFR part 261.4 or Industrial Wastewater Discharges per section 402 of the Clean Water Act, as amended.

Packaging & Climatic Concerns:

Coming Soon

Shipping Charges

Coming Soon

When will the order ship?

Coming Soon

Returns

Coming Soon